Motec Paint Protection Film(PPF)

During the transition of seasons, with decreasing temperatures, harsh weather, and even sandstorms in some cities, cars can be said to be going through a lot of hardships.

Car paint is the "face" of a car, and as the vehicle is driven outdoors for a long time, harsh weather conditions can directly affect the lifespan and performance of the car.

Whether it's sunlight, ultraviolet rays, or seasonal acid rain, cars are bullied by ubiquitous oxides such as bacteria, mites, etc., which can cause erosion to the "face" of cars.

A car is like a person. If maintenance is not taken care of, the "face" and paint surface of the car will easily produce spots, even cracks, and in severe cases, rust.

About car paint

The composition of car paint surface is actually very simple, from inside to outside, it is primer, colored paint, and clear paint.

▶ The primer is attached to the steel plate and mainly serves to prevent rust. It generally appears gray and can be seen from some accessories.

▶ Color paint mainly colors, with bright colors in the middle layer but insufficient brightness.

▶ Clear varnish, also known as glossy oil, adheres to colored paint, not only presenting a glossy aesthetic, but also serving to protect the paint.

In daily life, the emission of car exhaust can cause tangible killers of car paint, such as iron powder substances in the air, natural oxidation of paint surfaces, acid rain during rainy seasons, daily bird droppings, flowers, and branches.

In nature, the above-mentioned substances can cause tangible and intangible damage to it. These substances and conditions can destroy its decorative effect on vehicles, reduce its protective properties, and even cause cracks in the paint surface, making it difficult to repair.

What happens if you don't pay attention to protecting the car paint?

• Oxidation

Under the irradiation of ultraviolet rays from the sun, the paint film of the car continuously evaporates oil into the air to protect itself. Over time, it will cause excessive loss of paint on the surface, greatly reducing the brightness and depth of the paint. The paint surface will gradually turn white, forming an oxide layer, thereby shortening the lifespan of the car paint.

The visible phenomenon of the car paint turning black, white, and dull with the naked eye.

• Cracking

If necessary care is not taken on the paint surface, metal paint may produce very fine cracks, which will continuously penetrate the car paint until the entire paint layer is "broken through", and this phenomenon is called "cracking".

The main causes of car paint fading and discoloration are oil fumes and pollutants in the atmosphere. Fading is different from oxidation. When fading occurs, the car paint will show uneven color differences.

• Scratches/Water marks

Erosion marks are a type of surface abrasion. Insect carcasses, bird droppings, tree sap, tar, and asphalt in nature can all cause erosion marks.

Friction during use and improper daily care can lead to slight scratches on the car paint over time. Although the primer was not exposed, the scratches were very noticeable in the sunlight. And water marks are the traces left by the evaporation of water droplets, which are more easily stained by oxidized cars and cars that are commonly cleaned with detergent.

Why do we need paint protection film more in autumn?

The changing climate environment in autumn has a particularly significant impact on the paint surface of your car.

Fallen leaf corrosion: Corrosive acids cause permanent damage to the paint surface.

Acid rain damage: Acidic rainwater accelerates the oxidation and aging of car paint.

Day night temperature difference: Frequent temperature changes cause cracks on the car paint surface.

These problems cannot be completely solved by daily cleaning alone.

What are the improper nursing practices to avoid?

Avoid using products that are prone to oxidation (all products containing oil and fat will oxidize themselves), as this can cause damage to the car paint.

To avoid frequent polishing and grinding (including pure polishing and grinding, waxing, and glazing), frequent operation will make the paint surface thinner and eventually lose its decorative effect and protective ability.

And avoid dry cleaning the dust on the surface of the car paint. Because that will drive the sand particles on the paint surface, which will scratch the surface of the car paint.

The proper protective operation should be to apply a car paint protection film.

Motec Paint Protection Film(PPF) not only provides comprehensive protection for your car, but also further enhances the user experience through leading technology and high-quality materials.

Highly transparent and resistant to yellowing: Made of aliphatic TPU material, it effectively avoids yellowing problems after long-term use, ensuring that the original color of the car paint is long-lasting and bright.

Self repair technology: The paint protection film has self-healing function, and slight scratches will automatically disappear under the action of sunlight or hot water, keeping the car body long-lasting and perfect.

Anti pollution nano coating: High tech coating provides deep protection for car paint, resisting external damage such as ultraviolet rays, acid rain, bird droppings, and enhancing the gloss of car paint.