What does an PPF do?

1. Increase the brightness of the paint surface, cover up the original fine scratches and sun lines on the car paint

2. Insulate from corrosion and pollution. neither acid rain, nor bird droppings, tree resin, etc., can damage the paint.

3. Insulate ultraviolet rays, effectively slow down the aging of the car paint, to avoid the car paint fading.

4. Effectively resist cuts and scratches, but also has a hot repair function to keep the car paint in perfect condition.

5.Prevent stone bullet injury.The car paint is easy to be hurt by the splash of stone bullet when driving fast, stick the car coat, you can travel with peace of mind.

How many layers are there in an PPF?

Basically, the better paint protection films on the market have 5 layers: protection layer, antifouling coating, substrate layer, adhesive layer, and release film.

What types of substrates are available for PPF?

The market is still popular base material TPH, TPU, etc., then what is the difference between them? first, TPH is commonly known as the addition of plasticizer PVC, and because of the addition of plasticizer, making the TPH material is easy to become brittle, resulting in cracking, and the TPH material is easy to peel off the layer of adhesive, leaving adhesive prints on the body, but hurt the car paint. lastly, because of the essence of its still PVC, so the anti-yellowing performance is also very limited. TPU is commonly known as thermoplastic polyurethane, which is the most mainstream material on the market of the invisible car coat at the present time. has the properties of thermal repair, high toughness, wear and stain resistance, aging resistance, cold resistance, high temperature resistance, and so on.

 

Is a TPU PPF always better?

TPU is divided into aromatic and aliphatic two kinds, aromatic TPU contains benzene ring, easy to external interference, unstable, and easy to yellowing, aging, and aliphatic TPU high degree of resistance to yellowing, and molecular densities are several times that of aromatic, firmly adsorbed coating, not easy to separate off, blistering and warping, protection performance is more durable.

Does an PPF really protect against cuts and scrapes?

Small cuts based on the characteristics of the TPU material, will be automatically repaired, but if it is a violent collision, after all, invisible car coat is just a layer of film, of course, not so magical effect.

 

Is there anything I should be aware of after applying the PPF?

1. Just paste a small number of bubbles in the car coat is a normal phenomenon, with the evaporation of water, bubbles will go down.

2. After sticking the car coat within a week do not wash the car, because this time the car coat is not yet fully affixed, it is easy to be high-pressure water gun rushed away, but also easy to be rushed blisters. the same reason, just stick the car coat do not go on the highway, highway winds, and at this time the car coat pasted is not yet very firm, easy to be washed away by the wind.

3. After sticking the car coat can sunbathe, evaporate the water inside the car coat, so that the car coat and the car paint perfect fit, to prevent the air from entering the cause of warping and hollow. but do not sunbathe oh!

4. After sticking the car coat 3-7 days need to come back to the maintenance, to see if there are bubbles, edges and other problems Oh. confirm that there is no error you can rest assured.